Site logo

A tale of two circuits

NEWS STORY
20/06/2006

The trip to North America consists of two races just seven days apart in Montreal and Indianapolis and while, on the surface, there would appear to be little in common between the quirky Canadian Circuit Gilles Villeneuve, set on an island in the St. Lawrence Seaway and the famous Indianapolis Motor Speedway, where the cars race on part of the legendary oval track, from a car engineering viewpoint they share several similarities. Paolo Martinelli and John Iley, respectively head of Engines and Aerodynamics for Scuderia Ferrari Marlboro discuss the specific requirements of these two demanding circuits.

Both drivers will be starting in Canada with new engines and so they will have to deal with the demands of both North American weekends. "In Canada you need a combination of good aero efficiency, strong brakes and also a strong engine for good acceleration," begins Martinelli, outlining the prime requirements for the first of these two back-to-back weekends. "In terms of severity on the engine it is quite tough because there are frequent accelerations and a significantly long straight. And with Indy following it, it means we have two severe races one after the other - in this third of the season probably the most severe pair in terms of demands placed on the engine. We have put a great deal of effort into preparation for these two grands prix, with simulation on the dyno and track testing last week at Le Castellet, with a major test involving the race and test drivers and two cars. We did a long run to simulate as closely as possible the behaviour of the engine in the Canada and Indy races."

It will be the first time in many years that V8 engines have raced at these tracks. "But we have specific software with which we can simulate complete car behaviour and so we can predict the revs, gear ratios and car settings before we get there," says Martinelli. "In addition, for the engine, we can also simulate quite accurately the race to come on the dyno. Specifically, comparing the V8 to the V10 from last year, the period of wide open throttle will be between 10 and 20% higher and even the medium revs will be up by 6 to 800 rpm which adds significantly more stress to moving parts in the engine such as pistons, valves and other components."

With two tough races to deal with, Martinelli is naturally cautious when pushed on the question of reliability. "At the start of the season, we encountered an unexpected technical problem with the new V8 engine which we had not predicted from the results of winter testing," he admitted. "We confronted this problem in the piston area, identified it and fixed this issue. Apart from that, we have had no significant problem in terms of reliability. Of course we are trying to improve continuously in terms of performance, even though the next two races are very severe. It is impossible to say we are one hundred percent safe in terms of reliability, because in Formula 1 the safety margin is really tiny, a 2 to 3% margin only in order to maintain the necessary level of engine performance. So our performance in North America will also depend on the conditions we encounter. There are several parameters. You can have a hot race where you want to run at the front so that no other cars impede the flow of air through your radiators. If the competition is very strong then you have to push hard for the entire duration of the event, from the first to the last lap which produces additional stress for the engine. We have to be prepared always for the worst case scenario. We have a mileage target of around 600 kilometres per event, made up of a 300 km race, plus qualifying and free practice, which is then multiplied by two to complete both races."

However, there is little one can do to "preserve" engine life over these two weekends. "Normally we can try and protect the engines in terms of revs and temperature during free practice on Friday and Saturday morning," says Martinelli. "While working on car set up, the last two to three hundred rpm are not vital. But in qualifying and the race you cannot protect the engine unless you are in the lead with a good margin, something we have not seen anyone enjoy this season! Canada and Indy are both tough but it is the combination of the two together that is the really tough aspect. Both circuits are demanding. The peculiarities of Canada, as I've said before are good efficiency and acceleration and hard braking., Indy however, combines the aspect of the very long straight with a banked corner so you keep the throttle wide open for over 20 seconds, maybe we can expect 22 seconds of full throttle, the longest of the championship. Then there is the infield, where in engine terms, you can relax a bit. Specific components, mainly the pistons, suffer from the continuous long straight and that is the critical area. We have prepared some new developments for these events which we have tested in Ricard and from what we have seen there we will introduce them as of the next race.

LATEST NEWS

more news >

RELATED ARTICLES

LATEST IMAGES

galleries >

  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images
  • Pitpass.com latest F1/Formula 1 images

READERS COMMENTS

 

Sorry, comments are disabled for this article

Share this page

X

Copyright © Pitpass 2002 - 2024. All rights reserved.

about us  |  advertise  |  contact  |  privacy & security  |  rss  |  terms